Tools Tube Casing Shoes Driver Casing Piling Rigs in Construction Double Wall Steel Cylinder Casing for Deep Foundation

Basic Info

Shell Length	1/2/3/4/5/6m
Shell Thickness	40mm for Double Wall Type, 20mm for Single
Formation	Silt, Loose Formation, Boulder with Large Size
Layer	Non-Filling Karst Cave
Other Application	Secant Pile, Inclined Pile
Function	Avoid Collapse and Groundwater Immersion
Other Function	Benefit Guidance and Improves The Piling Quality
OEM	Yes
Trademark	RIGPA
Origin	China
HS Code	8431432000
Production Capacity	5000

Product Description

Advantages:

1. Main material: Q355B or 25CrMo from the top steel manufacturer in China.
2. High precision makes sure the matching of every couple of casing joints.
3. Auto welder helps to promote the welding performance and the strength.
4. Rich experience of providing casing for rotary drilling rigs of Baue, Sany and other famous brands.

Parameter:

Name	Pile Casing / Drilling Rig Casing / Rotary Casing Pipe
Type	Double wall casing	Single wall casing	Casing adaptor	Casing shoe
Shell length	1m/2m/3m/4m/5m/6m	1m/2m/3m/4m/5m/6m	800mm	586mm
Shell thickness	40mm	20mm	20mm	20mm
Diameter	520mm-2500mm
Material	Q355B for shells, Q355B for machined joints, 25CrMo for forged joints
Application	Silt layer, loose formation, boulder with large size, non-filling karst cave, secant pile, inclined pile

Casing technology
1. Casing driver
Through the connection of power head with casing adaptor, casing driver, casing and casing shoe, torque and pressure are transferred to casing and casing shoe. The drilling process alternates between casing drilling and drilling tool taking out the soil for lower resistance of casing drilling.2. OscilatorOscilators are applied for larger piles or longer casings against greater resistance. One end of the oscilator is fixed on the chassis of the rotary drilling rig, and the clamp of the oscilator holds the casing tightly. Then the left and right rotary cylinder push the casing rotating repeatedly and raising or pushing down the casing to finish the drilling process.
3. Vibrating hammer
The crawler crane lifts the vibration hammer, the hydraulic clamp at the bottom of the vibration hammer holds the top of the casing. The vertical vibrating force of eccentric wheel acts on the casing to drill into the hole or pull out from the hole.

Pile casing system mainly consists of the following parts:
1. Cardanic joint
The cardanic joint is for connecting the power head with bolts and casing driver with pins, which is used to transmit torque and pressure.
2. Casing driver
The diameter of the casing driver shall be consistent with the casing diameter; the bottom of the casing driver shall be connected with the casing. The function of casing driver is to transmit torque and pressure to the casing and casing shoe.

3. Casing
The top of the casing can be connected with the casing driver or other casings through the pins, and the bottom of the casing can be connected with the casing shoe or other casings.

4. Casing shoe
The cutting bits are inlaid on the bottom of the casing shoe, and various strata and rocks are cut around by rotating and downward pressure, which can slow down the resistance of the embedded casing and improve the drilling capacity of the casing.

5. Bolts
The conical rings and the thread rings are fixed on the casing. When every two casings are connected with each other, supporting rings shall be screwed into the thread rings and the conical rings with the sealing ring.

For any advice about selection of pile casings, please email us

Production of pile casings:

 

Shipment and package of pile casings:

1. Package: iron support and wrapped with plastic film
2. Transportation: by sea, land and air.
3. Main ports: Manzhouli, Tianjin, Qiangdao, Shanghai, Yiwu, Taizhou, Shenzhen, Guangzhou, Ruili, Pingxiang, Horgos, etc.
4. Delivery: Fast and timely delivery.

Application of pile casings:
1. Silt layer
When for the flowing plastic geology, it easily occurs that the pile diameter contracts because of its high water content and low strength, which can cause hole collapse. At this time, casing technology is used to support the pile wall and prevent the hole collapse.
2. Loose formation
When the rotary drilling rig is working in loose geology with rich groundwater, casing technology can be adopted to prevent hole collapse and protect groundwater by supporting the hole wall.
3. Boulder with large size
When there are large size boulders, and it is easy to cause deviation of holes due to uneven geological hardness. If casing technology is adopted, it can be forced to guide through casing to prevent deviation of holes, and the casing shoe can pass through boulders.
4. Non-filling karst cave
When drilling into non-filling karst cave with large volume, the mud will be lost in a moment, and the mud pressure and wall protection will be lost at the upper part of the pile. If it is loose geology, the hole will collapse; meanwhile, the hole deviation will be caused if there is non-filling karst cave without hole wall guidance. Casing technology is adopted to prevent hole collapse and deviation through casing protection and guidance.5. Occlusive pileOcclusive piling can meet the requirement of foundation pit project. Through the forced guide of casing, the precise drilling can realize the close joint of pile foundation, and benefit the waterproof and supporting.
6. Inclined pile
Some foundation engineering piles need not only axial bearing capacity, but also lateral support capacity, such as offshore drilling oil platform, port drilling pile, etc. when rotary drilling rig is constructed in inclined pile, it must be constructed under the guidance of casing, otherwise it is difficult to form holes or even cause damage to parts.
***The casing technology supports the hole wall to prevent hole collapse and avoid groundwater immersion and benefit guidance, and greatly improves the piling quality. It not only meets the environmental protection requirement of city construction, but also suits the field construction requirements.