Johnson Screen/Water Well Screen/Wedge Wire Screen for Well Drilling

Basic Info

Model NO.	XL-FY236
End Connection	Welded Ring, M&F, Flange
Slot/Aperture	0.1-60mm
Flow	Fito, Foti
Transport Package	Wooden Case, Carton, or Torder
Specification	2inch,3inch,4inch,6inch,8ich,9inch,10inch,12inch
Trademark	XL
Origin	Xinluwiremesh, Anpingcounty
HS Code	84139100
Production Capacity	100PCS/Day

Product Description

Stainless steel no magnetic water well screensXinlu Wire Mesh Products Co., ltd is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights.Slot opening for continuous-slot screens are manufactured by spacing successive turns of the outer wire to produce the desired slot size. All slots should be clean and free of burrs and cuttings.Each slot opening between adjacent wires is V-shaped, from the special shape of wire used to form the Johnson screens surface. The V-shaped openings designed to be nonclogging, are narrowest at the outer face and widen inwardly.

Wire Width	Wire Height	Relief Angle	Typical Support Rods
30V	.030"	.06"	10	.125" round
45V	.045"	.09"	10	.125" round
63V	.063"	.11"	13	.156" round
69U	.069"	.17"	8	.075" x 1" bar
93V	.093"	.15"	13	.25" round or .075" bar
93U	.093"	.17"	5	.25" or .38" round
125V	.125"	.20"	13	.38" round