SwRI develops novel microscopy method to eval

New method provides more comprehensive view of screen erosion

Southwest Research Institute

image: Southwest Research Institute has created and validated new microscopy methods to evaluate erosion in sand screens used in oil and gas production wells. The methods studied the effects of sand-laden slurries as they passed through wire-wrapped sand screens, particularly how the screen erodes as particles pass through the screen gaps. view more

Credit: Southwest Research Institute

SAN ANTONIO — Nov. 8, 2022 — Southwest Research Institute (SwRI) has created a new, more effective method to evaluate changes in sand control screens used in oil and gas production wells. The new evaluation method provides a more comprehensive view of where erosion occurs during accelerated life erosion testing on sand control screens, and is being expanded to evaluate other equipment in erosive environments.In oil and gas production wells, sand screens keep formation and fracturing sand in the reservoir while allowing fluids to be produced. Fine formation sands, smaller than the screen gaps, periodically pass through the screens, causing screen erosion that can eventually lead to screen failure. Sand produced with oil and gas in a well can erode the equipment from the reservoir to the surface, causing costly production halts and well work-overs to replace damaged equipment."Measuring erosion in sand screens is challenging because current industry methods provide a single point value describing the erosion that actually occurs differently in various regions. The industry currently uses two methods that provide inconsistent results," said Jessica Brysch, assistant program manager in SwRI's Fluids Engineering Department. "Those methods identify only the largest gap that results from erosive flow through a sand screen, whereas our method identifies each gap."SwRI's approach expresses the erosion in the sand screens graphically so that a more complete picture of the erosion can be understood. The method involves examining both the screen and base pipe layers with microscopic imaging equipment in order to map the material removed on both the screen layer and the base pipe layer."Our method utilizes novel microscopy," said Luis Gutierrez, a research engineer in SwRI's Fluids Engineering Department. "We have developed a novel visual method that offers spatial understanding of where erosion is happening. Our method allows us to see a map indicating the magnitude and location of erosion experienced across both the screen and base pipe layers."The team used internal funding to develop and evaluate the new test method. The SwRI erosion model expresses sand screen erosion graphically, providing a more complete picture of the effects of erosion. This method of erosion visualization has also been extended to other types of equipment in harsh environments to quantify erosion."Using our technique, the industry could more accurately predict the life of equipment under specific well conditions, rather than waiting for them to fail," Brysch explained. "Considering sand screens are the primary defense against sand production, and are incredibly costly to repair, that's a considerable advantage."For more information, visit https://www.swri.org/fluid-dynamics-flow-measurement/erosion.

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.