How a jubilee clip could save your boat

It is easy to ignore the fittings that clamp a hose onto an engine or seacock, but jubilee clips are all that stand between you and sinking, says Dag Pike

Critical connections should be secured with two jubilee clips. Credit: Bob Aylott

Take a look into the engine compartment of any yacht and you will see flexible pipes everywhere and hopefully see them fully secured with a jubilee clip or perhaps using a more generic term, worm drive clips, writes Dag Pike.

It can be the same when you look into the bilges where there can be pipework of all sorts linking up the ever increasing complexity of the plumbing systems on board.

Those jubilee clips are a vital part of the safety of your yacht but we tend to take them for granted, until they fail, that is.

Left: 316L stainless steel with grooved thread. Right: 304 stainless steel with through-cut thread

‘Why should they fail?’ I hear you ask.

A jubilee clip is made from bright shiny stainless steel and they are there for life, or at least until you need to replace the hose that they are securing.

Surely they are one of the things on a yacht that should not concern you unduly?

Have a think, however, about just how important they are.

They are designed to hold the hose that is connected to a spigot securely.

If a hose comes off a seacock, the source of the leak may be underwater before you find it. Credit: Graham Snook/Yachting Monthly

The consequences if they fail are that you can suddenly have a hole in the hull through which the seawater can pour in.

You may be able to find the seacock in time to be able to turn the water flow off but the chances are that it will be well underwater before you identify the problem and before you find that seacock, always assuming that there is one on the pipe in question.

It is not only on water pipes that you can find jubilee clips being used to secure a hose.

They are frequently used on the flexible sections of fuel pipes that allow the engine to be flexibly mounted, and if the jubilee clip fails there you could well get fuel leaking into the bilges or at least the engine might stop.

Wherever you look on a boat there are jubilee clips performing a vital role, so it is time to take them seriously.

There are two main reasons that a jubilee clip may fail.

One is the poor quality of some of the clips that can make them susceptible to corrosion in the salt-laden atmosphere of a boat's bilges.

The other is that often in the interests of economy, only one clip is used to make a connection when a good quality connection should always have two.

Regularly inspect hose connections

Let's look at the quality of the clips that can be found on a yacht.

To be secure and to take away any chance of corrosion, the clips used should be made from marine quality stainless steel which tends to be more expensive than the more mundane stainless steels used for other purposes.

There are so many different grades of stainless steel, each with different characteristics and the corrosion resistance can differ greatly.

Continues below…

Updating your instruments, and the data you can see on them, needn't cost the earth. Sam Fortescue investigates how to…

Keep your Blakes seacocks in top condition with a regular service. Marine surveyor Ben Sutcliffe-Davies shows us how

Water in the cylinders is enough to destroy an engine, but it's easy to do by mistake, says Vyv Cox

What's really going on under your deck fittings? Ben Sutcliffe-Davies investigates the hidden weaknesses

A broad brush method of testing stainless for its corrosion-resistant properties is to use a magnet. If the stainless is non-magnetic then there is a good chance it is marine quality.

If you have a magnetic knife rack at home you can see how stainless steel knives will stick to it.

This is because knife stainless has been formulated for its ability to hold a sharp cutting edge.

Heavy duty hose clamps are required on the exhaust

Other cheaper stainless steels are also magnetic but the marine grade should not be, so go for non-magnetic clips.

Beware that for domestic purposes, galvanised steel or other metals are sometimes used – a cardinal sin aboard.

There are two main types of jubilee clip; those with the screw threads in the straps cut right through the metal and those with the screw thread cut within the depth of the metal.

The latter are the best because the strap is much stronger with no holes cut in it and the screw is not likely to damage the material of the pipe being connected but of course, they are more expensive.

Numerous flexible host connections in the engine bay all need careful inspection. Credit: Graham Snook

You can find another type of clip usually used on larger diameter pipes, such as exhaust pipes, where the ends of the strap are terminated in round loops with a metal insert.

Here the screw tightens one left-handed thread and one right-handed to bring the ends closer together.

This type of jubilee clip is more secure and used on critical components.

Dag Pike is one of the UK's best-known nautical journalists and authors, covering both sailing and motor boating for many years.

When I say critical, all pipes and spigots that connect with the outside water are critical.

If they give way, water comes in so it is common on such connections to use double clips just in case, always assuming that the spigot onto which the pipe connects is long enough to accept double clips.

You can often find shorter spigots on fuel line connections and this reflects their automotive history.

It can be the same with the pipework on an engine, with virtually all yacht engines now derived from automotive units.

In marinising the engines the cheap automotive clips may be replaced with worm drive clips but usually only single clips are used even though a failure can let in seawater.

Jubilee clips look so harmless fitted onto the pipework but a failure has the potential to cause your boat to sink, particularly when left on moorings for a long time.

They should be checked regularly for any signs of decay, including behind them, for which you may need a mirror or a mobile phone.

Enjoyed reading How a jubilee clip could save your boat?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price.

Print and digital editions are available through Magazines Direct – where you can also find the latest deals.

YM is packed with information to help you get the most from your time on the water.

Follow us on Facebook, Twitter and Instagram.